Cortagen Reconstitution Calculator
Enter the amount you want to measure. The vial buttons will highlight which vial strengths create cleaner syringe-unit measurements.
What amount do you need?
Type the target amount, then choose mg or mcg. Example: 2mg or 500mcg.
Syringe size:
Possible vial strengths:
Best Match
Good Match
Usable
Harder to Measure
Example Cortagen Titration Schedule
| Protocol Item | Guidance |
|---|---|
| Dose | 1–5 mg per dose |
| Cycling Style | Bio-regulators are typically cycled as periodic doses rather than continuous daily consumption. |
| Phase | Schedule |
| Loading Phase (Year 1) | |
| Maintenance Phase (Year 2+) |
Possible vial strengths:
What Is It?
Cortagen
Cortical peptide bioregulator.
Bacteriostatic Water
Sterile water containing a bacteriostatic preservative, commonly used when preparing multi-use research vials.
How To Mix Cortagen
1
CleanUse alcohol swabs to clean the tops of both vials.
2
Draw BAC WaterDraw the selected amount of bacteriostatic water.
3
Inject SlowlyAdd the liquid slowly down the side of the vial.
4
Swirl GentlyDo not shake. Swirl gently until dissolved.
5
Store ProperlyStore as directed and protect from heat and light.
Best Practices & Common Mistakes
Best Practices
- Use sterile technique.
- Protect from light and heat.
- Store refrigerated when appropriate.
- Use clean syringe-unit math before measuring.
Common Mistakes
- Confusing milligrams with milliliters.
- Choosing an option with awkward decimal units.
- Using too little liquid for very small measurements.
- Shaking the vial aggressively.
Cortagen Storage & Handling
Lyophilized Powder: −20°C (−4°F) for long-term storage (up to 24 months). Refrigeration 2–8°C (36–46°F) for short-term use (up to ~3 months). Original sealed vial in the freezer is safest.
Reconstituted Solution: 2–8°C (36–46°F), use within ~7–14 days. Keep sealed, avoid light, and do not repeat freeze-thaw cycles.
Reconstituted Solution: 2–8°C (36–46°F), use within ~7–14 days. Keep sealed, avoid light, and do not repeat freeze-thaw cycles.
Frequently Asked Questions
Divide mcg by 1000. For example, 50 mcg = 0.05 mg; 100 mcg = 0.10 mg; 200 mcg = 0.20 mg. Enter this decimal value in the “Desired dose” field. Be careful not to enter the mcg number as mg – 50 mg instead of 0.05 mg would be 1000× too high and likely impossible to draw.
With a 5 mg vial + 1 mL BAC → 5 mg/mL → 0.05 mg = 0.01 mL = 1 unit (below the 4‑unit “Poor” threshold). Any volume below 4 units is marked “Poor” because it is extremely difficult to measure accurately. To get a usable measurement, increase your dose (if appropriate) or use a larger BAC volume and the smallest vial: e.g., 5 mg vial + 5 mL BAC → 1 mg/mL → 0.05 mg = 0.05 mL = 5 units → now “Usable” or “Good” if it lands on a whole unit. The calculator’s color coding will show the best available option.
For a 0.1 mg dose on a 100‑unit syringe, aim for units that are multiples of 5. Examples:
5 mg vial + 5 mL BAC → 1 mg/mL → 0.1 mg = 0.1 mL = 10 units (×5 → Best)
6 mg vial + 3 mL BAC → 2 mg/mL → 0.1 mg = 0.05 mL = 5 units (×5 → Best)
10 mg vial + 5 mL BAC → 2 mg/mL → 0.1 mg = 0.05 mL = 5 units (×5 → Best)
Avoid 1 mL BAC with small doses – it creates very high concentration and tiny volumes. The calculator highlights green (Best) for the most accurate draws.
5 mg vial + 5 mL BAC → 1 mg/mL → 0.1 mg = 0.1 mL = 10 units (×5 → Best)
6 mg vial + 3 mL BAC → 2 mg/mL → 0.1 mg = 0.05 mL = 5 units (×5 → Best)
10 mg vial + 5 mL BAC → 2 mg/mL → 0.1 mg = 0.05 mL = 5 units (×5 → Best)
Avoid 1 mL BAC with small doses – it creates very high concentration and tiny volumes. The calculator highlights green (Best) for the most accurate draws.
Yes, if you reconstitute with bacteriostatic water and store the vial refrigerated (2–8°C). Bacteriostatic water preserves the solution for about 28 days. For a 10‑day cycle at 0.1 mg per day, you need 1 mg total – a 5 mg vial is more than enough. The calculator’s “Doses per vial” display helps you plan. For example, a 5 mg vial at 0.1 mg per dose gives 50 full doses (5 / 0.1 = 50). Keep track of how many you have taken, and discard after 28 days even if solution remains.
Yes, the calculator assumes complete solubility at the concentrations generated by the chosen BAC volumes (1,2,3,5 mL). Cortagen is generally very soluble in water, so concentrations up to 50 mg/mL (e.g., 50 mg in 1 mL) should dissolve without issue. However, if you see any cloudiness or particles, add more BAC water than the calculator’s preset options (e.g., use 5 mL for any vial). The calculator does not warn about solubility limits – always inspect the solution before drawing.
Practical takeaway: If your real goal is weight or metabolic health, the most useful next step is discussing approved treatment options with a clinician rather than relying on an unapproved compound.
Important: This tool is for informational and research-reference purposes only. Not intended for human or veterinary use.